Print Page | Close Window

2006 matrix remote start no start problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125205
Printed Date: May 11, 2024 at 5:15 AM


Topic: 2006 matrix remote start no start problem

Posted By: raynbowman
Subject: 2006 matrix remote start no start problem
Date Posted: December 22, 2010 at 5:35 PM

prostart CT3271 installed valet switch in and out works. This part of system functions
When plugging multi connectors in, in sequence 5 6 12 the cars lights should flash 4 times after inserting connector 12, but they flash 4 times upon inserting 6 prong connector. Hood switch works, park lights illuminate for about a second, when hood is opened. Supposed to get three parking light flashes if system learns properly. We get none. Car will not start with remote. Car will not continue running after ignition is turned off.



Replies:

Posted By: tedmond
Date Posted: December 22, 2010 at 8:15 PM
you prob got a bad brain from crappytire. just go change it and see how that works out

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert


Print Page | Close Window