2007 liberty
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125217
Printed Date: May 24, 2024 at 7:07 AM
Topic: 2007 liberty
Posted By: cmk0808ny
Subject: 2007 liberty
Date Posted: December 23, 2010 at 8:42 AM
on a 2007 jeep liberty- does the factory keyless remotes/key work while car is under remote start. looking to do a 1 button but keep the driver door priority unlock first.
Replies:
Posted By: simplyfalling
Date Posted: December 23, 2010 at 5:35 PM
Yes it stays operable when the vehicle is running. Easy way to test for sure is to start the truck then try locking or unlocking from a seperate key. Perhaps you could even use the key that you started the truck with.
Posted By: cmk0808ny
Date Posted: December 24, 2010 at 8:11 AM
sorry- its actually an 05 liberty. it has the sentry key. I tried the buttons on the remote while it was in the ignition but they did not work. i did not try as you said with the second remote to see if it works. i figured its the keysense that stops it from working. but if anyone knows for sure please chime in.
thanks
Posted By: simplyfalling
Date Posted: December 24, 2010 at 12:47 PM
It should work fine. If the ignition system senses the rfid from the key it wont allow that remote to work. Try locking/unlocking with the second key. Those fobs usually retain operation when running under remote start.
|