98 qx4, python 991 issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125235
Printed Date: May 07, 2025 at 2:17 PM

Topic: 98 qx4, python 991 issues

Posted By: nocturnalaudio
Subject: 98 qx4, python 991 issues
Date Posted: December 24, 2010 at 8:37 PM

Hey all

Anyone have a step by on how to install a python 991 into a 98 qx4. I'm not sure how to hook up some of these wires. I'm really stuck on this stupid setup.

Thanks

Replies:

Posted By: zerepdivad
Date Posted: December 25, 2010 at 1:10 AM

i don't think anybody will have a step by step on your particular vehicle. no idea why anybody would.
but if you list SPECIFICS that you're having issues with i'm sure somebody can help assist you.

-------------
A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Posted By: nocturnalaudio
Date Posted: December 25, 2010 at 1:30 AM

Point taken....Specifically im looking for the Factory Security alarm module. I'm not sure where its located and from the diagrams I have found online most of the wires i need are located there. Also for the Qx4 which wire should i cut from from the ignition harness to sure for my starter relay. Im kind of confused becuase the factory diagram off this site gives the impression that i need to hook up 2 starter wires to my Remote starter. I could be interpreting it incorrectly im sure but if anyone would be able to shed some light on this id really appreicate it.

Thanks again for any help.