Print Page | Close Window

Factory trunk poper??

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12524
Printed Date: July 22, 2025 at 2:05 AM


Topic: Factory trunk poper??

Posted By: emorse2323
Subject: Factory trunk poper??
Date Posted: April 21, 2003 at 6:46 PM

I had a factory trunk poper and lock/unlock on my car, then i got a DEI alarm I was wondering how i can interface it to i can use my alarm remote to pop the trunk.
thanks



Replies:

Posted By: emorse2323
Date Posted: April 22, 2003 at 9:05 AM
anyone?



Posted By: djfearny2
Date Posted: April 22, 2003 at 10:26 AM
use the red white wire from alarm and connect it to pin 85 of a normal five pin 12 volt relay connect pin 86 and 87 together and leaving one wire from them to constant 12 volts. 87 a not used . and pin 30 to your possitive truck wire. which you could email me tell me your car. and i will tell you where it is and what color . and also tell you if it is possitive or negative.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.



Posted By: emorse2323
Date Posted: April 22, 2003 at 4:39 PM
Its a 2001 mercury cougar


Print Page | Close Window