viper 5701 led flashes very dim
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125268
Printed Date: April 28, 2024 at 12:10 PM
Topic: viper 5701 led flashes very dim
Posted By: skywatcher2001
Subject: viper 5701 led flashes very dim
Date Posted: December 26, 2010 at 8:38 PM
Hey Guys,
I have a Viper 5701 w/remote start all connected and working for about 6 months (in a 1999 Chevy Silverado). Recently I installed two (2) separate LED's (on each door) and connected them thru the port at the end of the module for external LED's.
When activating the Alarm the LED's flash BRIGHTLY very noticeable as you approach the vehicle. After about one (1) minute they dim significantly and are barely noticeable. What is causing this?
-------------
Pass on what you have learned - Yoda
Replies:
Posted By: calijtee1
Date Posted: December 29, 2010 at 12:06 AM
more than two u have to put the l.e.ds in series chain link them basically like the xmas lights lol
-------------
installers do it best. we got the magic hands!
Posted By: skywatcher2001
Date Posted: December 29, 2010 at 11:44 AM
Got it. Thanks. I DIDN'T do that...I sent them both to the same lead.
-------------
Pass on what you have learned - Yoda
|