2007 caliber
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125305
Printed Date: May 01, 2025 at 6:15 PM
Topic: 2007 caliber
Posted By: lucasoil4u
Subject: 2007 caliber
Date Posted: December 28, 2010 at 5:41 PM
Im putting a remote start in a 2007 Caliber with a Sentry key. How do i wire up the relays with resistors to work the remote start? what wire goes to what number in the relay and such . Like the accesorary wire and Starter 2 wire. Thanks
Ryan m
Replies:
Posted By: Mike M2
Date Posted: December 28, 2010 at 6:17 PM
If you have the gray sentry key you need a bypass for it. Why not get a data module that does not only the bypass but also takes care of the MUX wiring at the switch? The Idatalink module will do bypass, locks, MUX, all door and trunk trigger, Tach wire etc. maiking the install very simple...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: kreg357
Date Posted: December 28, 2010 at 6:24 PM
X2 with Mike M2. ( couldn't help myself  )
But if you really want to do it with relays, here is a diagram : https://www.bulldogsecurity.com/diagrams/extrainfo/diagrams/20567_CALIBER_CHRYSLERS%20STARTER%202%20AND%20ACCESSORY%20DIAGRAM.pdf ------------- Soldering is fun!
Posted By: lucasoil4u
Date Posted: December 28, 2010 at 6:38 PM
so if you get the idatalink i dont have to do any relays? and who makes the idatalink
Posted By: kreg357
Date Posted: December 28, 2010 at 6:44 PM
Here is a link to iDatalink : https://www.idatalink.com/support/helpdesk Look up your car. All of the Solo ( orange box ) modules come pre-loaded with firmware. Download the install guide for install wiring. ------------- Soldering is fun!
Posted By: Mike M2
Date Posted: December 28, 2010 at 6:48 PM
You can get one here
https://store.idatalink.com/index.php?l=product_detail&p=154
You can find them cheaper if you search around. This product does your entire install for you... ------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: lucasoil4u
Date Posted: December 28, 2010 at 6:50 PM
ok do you have to bury a key if you do it this way or not?
Posted By: Mike M2
Date Posted: December 28, 2010 at 7:02 PM
Nope, and you only need one key to program. Look at the link and it will show what all it will do. You can also view the install guide, very easy to put in...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: lucasoil4u
Date Posted: December 28, 2010 at 7:24 PM
which one would you put in thre is a couple different options.
Posted By: Mike M2
Date Posted: December 28, 2010 at 8:13 PM
Go with the one that comes up in the link. It comes preflashed and does all you need for the least money.
-------------
Mike M2
Tech Manager
CS Dealer Services
|