Print Page | Close Window

fortin evo chr and python ps5000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125334
Printed Date: March 29, 2024 at 1:08 AM


Topic: fortin evo chr and python ps5000

Posted By: jasonrush
Subject: fortin evo chr and python ps5000
Date Posted: December 29, 2010 at 10:56 PM

I am going to be installing a Python Smart Start 5000, which uses a python 5103 module, on a 2010 Challenger using the evo-chr. Ive been looking at the diagrams and I cant figure out where to hook the starter and ignition wires to. The evo-chr instructions say the starter and ignition should both be positive but the python instructions only show the ignition as positive and the starter wires negative. Anyone have any advice?



Replies:

Posted By: tedmond
Date Posted: December 30, 2010 at 9:36 AM

the starter wire from the python is actually positive. you must be looking at the 2nd starter output (-) 250ma.



-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert





Print Page | Close Window