power door locks on dodge dakota

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125357
Printed Date: May 15, 2025 at 6:16 PM

Topic: power door locks on dodge dakota

Posted By: alostdreamer
Subject: power door locks on dodge dakota
Date Posted: December 30, 2010 at 7:48 PM

I'm installing a python 991 lc3 system in my 92 dodge dakota. for the power door locks this is the harness
posted_image

i found a wiring diagram that says it is a 5 wire reverse polarity. i'm pretty sure i'll have to use relays but i'm not sure which relay diagram to use. any help would be appreciated.

Replies:

Posted By: kreg357
Date Posted: December 30, 2010 at 8:13 PM

Here is wire color info from Bulldog Security :
POWER LOCK ORANGE / VIOLET (TYPE C) IN DRIVERS KICK PANEL, BLACK plug behind FUSEBOX
POWER UNLOCK PINK/VIOLET (TYPE C) IN DRIVERS KICK PANEL, BLACK plug behind FUSEBOX

Here is link to relay diagram :
https://www.the12volt.com/doorlocks/page3.asp#5w

-------------
Soldering is fun!

Posted By: alostdreamer
Date Posted: January 04, 2011 at 4:23 PM

thanks for the reply, i bought the 451m relay module from direct electronics wiring the locks according to the diagram and everything is working fine, it took me a minute to find the wires i needed since they were covered in tape, but other than that everything went fine, thanks again

Print Page | Close Window