matching fcc id s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125366
Printed Date: May 21, 2024 at 7:42 PM

Topic: matching fcc id s

Posted By: njerje23
Subject: matching fcc id s
Date Posted: December 31, 2010 at 6:27 AM

I just removed a car-pro cpx-rs1 remote start (by auto page) off of a vehicle because they lost the remotes. I am looking to install this on one of my vehicles as a cheap remote start option. However when looking to match a remote they tell me it requires a xt-21 remote, but the fcc id on the unit and the fcc id on the remotes don't match. do these two numbers need to match for them to be compatible? Just want some input before i waste my time with this unit. thanks

-------------
Nate

Replies:

Posted By: njerje23
Date Posted: December 31, 2010 at 7:28 AM

do the fcc id numbers have to match on the remote start/alarm module and the remote? trying to replace remotes and would like to know.

-------------
Nate

Posted By: tedmond
Date Posted: December 31, 2010 at 10:11 AM

no they dont match. FCC depends on remote frequency used.

you need to know the model/brand of rs/alarm and a good google search will tell you what remotes to buy.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window