viper 590xv deleting remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125414
Printed Date: May 20, 2024 at 6:29 PM
Topic: viper 590xv deleting remote
Posted By: 97f150ext
Subject: viper 590xv deleting remote
Date Posted: January 02, 2011 at 6:36 PM
I have searched and found a few topics about this, but I cannot get this system to delete all transmitters. This is the first time I have ever had to delete any remotes, and I am having no success. With the ignition on, 12 pushes on the program button and then hold, then what is the correct next step? I have tried pushing any button on a programmed transmitter but it continues to work after I exit the feature by turning the key off. I know this should be a simple task, but I am struggling and need some guidance. Thanks ahead of time.
Replies:
Posted By: itsyuk
Date Posted: February 01, 2011 at 9:31 PM
excerpt from the installation manual of a 560XV (probably the same for yours)
The learn routine may be locked if previously programmed using the Bitwriter®. If the horn generates one long honk when attempting to program the unit, the learn routine is locked and must be unlocked using the Bitwriter® before proceeding.
-------------
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.
|