Print Page | Close Window

trunk and glass release motor?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125448
Printed Date: May 12, 2025 at 1:24 AM


Topic: trunk and glass release motor?

Posted By: laserbeak43
Subject: trunk and glass release motor?
Date Posted: January 04, 2011 at 2:08 PM

Hello,

I'm looking for a trunk and glass release motor to add to my DIY power lock system.

I'm guessing i would need a solenoid? Something that can go to 3 different positions.

I'm not sure though. Anyone have any info that would help?

Thanks.




Replies:

Posted By: Twelvoltz
Date Posted: January 04, 2011 at 2:52 PM
What is the application? This information may help provide a more thorough answer. A solenoid is what you would normally use for popping a trunk, yes...an actuator would allow multiple positions. So you may just be looking for a 2-solenoid setup, one to pop the glass, one to pop the trunk?

-------------
Installer, IT support, and FFL. I need less hobbies.



Posted By: laserbeak43
Date Posted: January 04, 2011 at 3:11 PM

I want to pop the trunk and/or glass with the 2 extra feature options on my remote. I guess what i would like to do is:

  • press a button to pop the trunk
  • press a button to pop the glass
  • send a double pulse to open or lock the trunk

i hope this info narrows it down. I have a 2006 pontiac vibe if that helps.


Print Page | Close Window