viper smartstart and clifford 50.5x

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125502
Printed Date: May 10, 2025 at 12:17 PM

Topic: viper smartstart and clifford 50.5x

Posted By: rt4x4
Subject: viper smartstart and clifford 50.5x
Date Posted: January 06, 2011 at 4:26 PM

Does anyone know if the viper smartstart will work with the Clifford 50.5x using the bitwriter port? I did not know if it worked with that series

Replies:

Posted By: Twelvoltz
Date Posted: January 06, 2011 at 8:20 PM

There is a post in another forum that says the installer did a 50.5x and it worked fine.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: rt4x4
Date Posted: January 11, 2011 at 8:31 PM

It works great! thanks

Posted By: rt4x4
Date Posted: January 22, 2011 at 3:44 PM

I have another question, where did you mount the module,Just high up inside the dash?

Print Page | Close Window