fortin evo all

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125536
Printed Date: July 18, 2025 at 3:33 PM

Topic: fortin evo all

Posted By: maxcat
Subject: fortin evo all
Date Posted: January 08, 2011 at 1:04 AM

Hi all,

Wondering if anyone has had some experience with the evo-all bypass module from Fortin. I am trying to program it to a 2003 Honda Accord following the instructions. I plug in the 4 pin data link with the programming button in, releasing it when the light is red. I then push the programming button one time and it flashes; however, when I push it a 2nd time, instead of flashing once, it continues to flash repeatedly. This is the latest programming sequence from Fortin online.

I have also updated the module to the latest firmware. Any ideas or help would be appreciated. thanks

Replies:

Posted By: tedmond
Date Posted: January 08, 2011 at 1:17 AM

never had a problem programming the evo's

hold button - insert power wire - LED stays on release button - press prog button once - press again - insert other connectors - turn on ign and led will flash rapidly

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: maxcat
Date Posted: January 08, 2011 at 1:33 AM

thanks for the reply tedmond, easy procedure however I get the red led flashing right after I press the button the second time, the paperwork says it should again flash once,then turn to ignition, and have it then flash rapidly. I will keep trying.

thanks again for the reply

Posted By: tedmond
Date Posted: January 08, 2011 at 8:32 AM

keep us posted.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert