Print Page | Close Window

2010 dodge journey

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125568
Printed Date: April 28, 2024 at 10:58 AM


Topic: 2010 dodge journey

Posted By: maxcat
Subject: 2010 dodge journey
Date Posted: January 09, 2011 at 12:56 PM

Hi guys, I am going to be putting an r/s into a 2010 dodge journey. Using the evo-chr, the install actually looks very simple.

 My question is, how hard is it to get to the ignition harness of this vehicle. It looks like the ignition switch is actually on the bottom panel and not the steering shroud.Just wondering if someone has taken this particular panel off in the past. The reason I ask is some of these panels can be a little difficult to take off and quite often there can be small tricks or tips to there removal

 Any advise or insight would be appreciated Thank you in advance




Replies:

Posted By: ayalja123
Date Posted: January 10, 2011 at 6:54 PM
Did you look at the DB-ALL @  xpresskit.com. All your wires look to be right by the switch.


Print Page | Close Window