Print Page | Close Window

04 durango factory disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125653
Printed Date: May 12, 2025 at 8:32 PM


Topic: 04 durango factory disarm

Posted By: yayay
Subject: 04 durango factory disarm
Date Posted: January 13, 2011 at 4:05 PM

i have the compustar remote start with the blade type bypass everything went fine except the factory disarm is still coming on when the truck is remote started



Replies:

Posted By: kreg357
Date Posted: January 13, 2011 at 4:22 PM

Did you connect Keysense?

Key Sense            PURPLE / TAN  (-)                    IGNITION SWITCH HARNESS



-------------
Soldering is fun!



Posted By: simplyfalling
Date Posted: January 13, 2011 at 4:44 PM

I have had to wire up keysense, like Kreg suggested, but also had to turn on unlock before start and lock after start.  If your using a blade style unit, then with the compustar its probably option 1-01. 




Posted By: tedmond
Date Posted: January 13, 2011 at 6:51 PM
the keysense should disarm it without unlocking.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert



Posted By: simplyfalling
Date Posted: January 14, 2011 at 8:49 AM
It should, but it doesnt always.  I have personally had to do this on atleast three durangos this month.  The keysense will only keep the truck from rearming the alarm. 


Print Page | Close Window