Print Page | Close Window

Door Lock Actuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12573
Printed Date: September 19, 2025 at 10:04 PM


Topic: Door Lock Actuators

Posted By: dfiddy
Subject: Door Lock Actuators
Date Posted: April 22, 2003 at 5:29 PM

I am in the process of adding door lock actuators to my 1990 chevy S10, I have them all wired up but how do I attach the motor to the lock rod itself. Any help would be greatly appreciated. Thanks in Advance...




Replies:

Posted By: Derek
Date Posted: April 22, 2003 at 6:45 PM
Didn't you get a kit with the actuators? You should have
a couple of brackets, 2 thin metal rods that fit through
the end of you actuators, that then attach to the lock rods with an additional brass fitting's that lock the push/pull rods from the actuator to the OEM lock rods.

your going to definitely need these things.

Derek.

-------------



Posted By: dfiddy
Date Posted: April 22, 2003 at 8:25 PM
Nah no kit for me... That's why I didn't know how to mount them...I found these just laying around so I yoinked em'. :) Thanks for the info though




Print Page | Close Window