Print Page | Close Window

2007 nissan maxima

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125734
Printed Date: May 10, 2025 at 8:08 AM


Topic: 2007 nissan maxima

Posted By: usmcvet
Subject: 2007 nissan maxima
Date Posted: January 18, 2011 at 4:11 PM

R/S on a 2007 Nissan Maxima. Using XK07 and I have a question about the ' Ignition In ' coming off the bypass. Do I come off the IGN 1 wire for this connection or use another wire ? Thanks !!



Replies:

Posted By: kreg357
Date Posted: January 18, 2011 at 6:58 PM

The XK07 Orange Ignition wire would be connected to the cars' BLACK/ Red Ignition wire at the ignition switch harness. 

You could just connect it to the Remote Starters heavy gauge Ignition output wire that gets connected to that BlackRed Ignition wire at the ignition switch harness.

There appears to be conflicting info on this cars Ignition wire(s).  Bulldog only lists one IGN - Red.  Audiovox lists two ignitions, IGN1 = BLACK/ Red and IGN2 = Red.   DEI says one IGN = BLACK/ Red.   Time for the DMM....



-------------
Soldering is fun!


Print Page | Close Window