2007 magnum remote start viper 5902

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125738
Printed Date: April 18, 2024 at 1:13 AM

Topic: 2007 magnum remote start viper 5902

Posted By: rallysport
Subject: 2007 magnum remote start viper 5902
Date Posted: January 18, 2011 at 9:22 PM

I connected everything according to the 1084 doc from directed. I haven't installed the PKUMUX yet. I had to order one but thought I could get everything to work by leaving the key inserted in the cylinder for testing purposes, however with or with out the key the car will start and then shut down after 2 seconds. The dash lights never come on so I am assuming there is something up with the ignition wire.
Is the 1084 doc necessary when using the PKUMUX?

Replies:

Posted By: monty_77
Date Posted: January 19, 2011 at 1:02 AM

you will not need to add relays and resistors the PKUMUX will do that for you

-------------

Posted By: tonanzith
Date Posted: January 20, 2011 at 12:50 AM

If the key is in the ignition and the remote start STILL starts and shuts down, it sounds like the Tach wire is incorrect or not programmed.

-------------
Gary Sather

Print Page | Close Window