viper 5701 remote start, 02 jeep liberty

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125778
Printed Date: May 03, 2024 at 5:02 AM

Topic: viper 5701 remote start, 02 jeep liberty

Posted By: MrMaaaan
Subject: viper 5701 remote start, 02 jeep liberty
Date Posted: January 21, 2011 at 12:57 PM

Hi, i installed a Viper 5701 Alarm/Remote start into a 2002 jeep liberty, hooked all the wires up, connected the unit to an xpresskit bypass in D2D, the problem is that the remote start and all features/functions will work flawlessly for a few days, then when i go to remote start the car the ignition will come on but will not remote start, and still all functions work except the remote start part, then i have to remove the small 15amp fuse wait 10 sec and plug it back in and it works fine again for a few more days. has anyone had this problem? anyone know a fix?

ive installed many remote starts into family/friends cars and they all work perfectly.

-------------
Vincent Torrez

Replies:

Posted By: kgerry
Date Posted: January 21, 2011 at 2:27 PM

sounds like a D2D problem.... have you tried rewiring the module W2W? i just had this problem on a Lexus using an XK01 in D2D.... W2W corrected the problem....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: MrMaaaan
Date Posted: January 21, 2011 at 2:46 PM

well i wired W2W, pretty sure i had all the correct connections, unplugged the D2D cable and the locks and such werent working. obviously the common connections, 12+ ground lock to lock unlock to unlock. and pretty sure the ground when running wore goes to ground when armed on the 5701?? im using the xpresskit DLPKCHG1-CHRY4 i thought maybe it was the brain box. im pretty sure i connected all the wires for the W2W correctly

-------------
Vincent Torrez

Posted By: MrMaaaan
Date Posted: January 21, 2011 at 2:51 PM

well i wired W2W, pretty sure i had all the correct connections, unplugged the D2D cable and the locks and such weren't working. obviously the common connections, 12+, ground, lock to lock, unlock to unlock. and pretty sure the ground when running wire goes to ground when armed on the 5701?? im using the xpresskit DLPKCHG1-CHRY4 i thought maybe it was the brain box. im pretty sure i connected all the wires for the W2W correctly

-------------
Vincent Torrez

Posted By: kreg357
Date Posted: January 21, 2011 at 3:45 PM

The bypass' Ground When Running goes to the Vipers' Blue (-) 200mA Status Output wire.

-------------
Soldering is fun!

Posted By: MrMaaaan
Date Posted: January 21, 2011 at 3:51 PM

kreg357 wrote:

The bypass' Ground When Running goes to the Vipers' Blue (-) 200mA Status Output wire.

If i didnt have that hooked up correctly, would that be why the W2W wasnt working?

-------------
Vincent Torrez

Posted By: kreg357
Date Posted: January 21, 2011 at 4:02 PM

For the remote start portion, yes. It needs to see GWR to turn on the transponder bypass portion. The Locks should work OK.

-------------
Soldering is fun!

Posted By: MrMaaaan
Date Posted: January 21, 2011 at 4:16 PM

okay, i was thinking it was the starter/alarm box, ive never had problems w D2D so i always use that. but if my problem w the remote start portion only working sometimes and having to pull the 15A fuse then it works again then i will be using W2W.

when it was hooked up D2D everything worked fine as a stated above for about 4 days or so then when i go to remote start it, everything powers up, but it dosent crank. then i pull fuses and try again and it works perfect for about 4 more days.

If anyone else has any suggestions, feel free to post

thanks everyone!!

-------------
Vincent Torrez

Posted By: MrMaaaan
Date Posted: January 24, 2011 at 5:53 PM

Posted By: monty_77
Date Posted: January 24, 2011 at 6:02 PM

what do the parking light do on the failed attempt.

might be in valet mode

-------------

Posted By: MrMaaaan
Date Posted: January 24, 2011 at 6:18 PM

monty_77 wrote:

what do the parking light do on the failed attempt.

might be in valet mode

no, light flash, the remote start starts the remote start sequence like its supposed to but wont crank, if i pull fuses and reinsert them then it works fine for a few days, then goes back to the same thing. i tried wiring in W2W and unplug the D2D cable and then the power locks wont work and the trunk wont pop.

-------------
Vincent Torrez