dei 552t ; programing remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12578
Printed Date: September 19, 2025 at 11:59 PM

Topic: dei 552t ; programing remote

Posted By: gs672
Subject: dei 552t ; programing remote
Date Posted: April 22, 2003 at 7:53 PM

hi everyone. I'm a newbie, and searched every where on how and if I can program an old Your Valet 552t. I bought my truck 6 months ago, and just found out that it's installed already and have no remote. the problem is it was made 12/95 and there's no led or valet switch. all the information I found is on the newer ones have these devices. I don't want to order the remote (491t) if I know it won't work. I do know one of the dip switches is for I think " tx learn" if that means anything. if anyone can help me I would appreciate it.

thanks in advance

Replies:

Posted By: JWorm
Date Posted: April 23, 2003 at 7:05 AM

Dipswitch 4 is for programming a remote if I remember correctly. I think you put the ignition on, the dipswitch in the on position, and push button one on the remote. Its been a while, so I'm not so sure how accurate that is.

Posted By: gs672
Date Posted: April 23, 2003 at 4:05 PM

I know you said it's been a while ,but do you know if the same would be for channel 3 (buttons 1 & 2 together)?

Posted By: gs672
Date Posted: June 12, 2003 at 3:41 PM

I know it's been a while, but I finally got my remote (postal mix up). It is exactly what you said and works great. Thank you.