i must be missing something, 5901 shock s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125803
Printed Date: May 13, 2025 at 8:29 AM

Topic: i must be missing something, 5901 shock s

Posted By: monsterx7
Subject: i must be missing something, 5901 shock s
Date Posted: January 22, 2011 at 6:23 PM

Has anyone had an issue with not being able to access the shock sensor adjustment on the 5901 remote? I’ve made sure the doors were closed and the system was disarmed (as described in the directions) and then when I press hold the “f” button to access the main menu the “Shock Sensor” options is not there. Does this sound like my remote needs a software update or am I missing something else?

Replies:

Posted By: t&t tech
Date Posted: January 22, 2011 at 7:09 PM

I think you have to go into the system menu and it's a sub menu under that.

Posted By: monsterx7
Date Posted: January 23, 2011 at 7:52 AM

I figured out what the issue was this morning. A setting was incorrect on the remote. Under REMOTE SETUP-SYSTEM TYPE-RKE (Remote Start Only) was selected instead of SEC (Remote Start & Security). As soon as I selected SEC (Remote Start & Security) the SENSOR ADJUST option was now available on the main setup menu.

Posted By: t&t tech
Date Posted: January 23, 2011 at 9:59 AM

There ya go.

Print Page | Close Window