I am looking to install a starter w/keyless in one of these. Does anyone have a diagram for one?
I searched but only one thread popped up from June 2002 for *2011 Corolla*.
Thanks!
-------------
-Dennis
Go to techservices.audiovox.com and sign up, it's free. Be aware there are two wiring harnesses in the 2011 Corolla and colors differ depending on where it's made....
-------------
Mike M2
Tech Manager
CS Dealer Services
I looked over there. Only one diagram is posted and it is for 2010. Are the 2011 the same?
I just need to do remote start, locks and possibly horn honk. Thanks for the help.
-------------
-Dennis
this car is easy to do.
the only thing is, door locks i had to test from the passenger side switch. From the top of my head
2 ignition wires, 1 acc, 1 start
door locks white plug in kick panel, most bottom plug
horn is at the switch, can be found in ignition harness.
i have a diagram on my laptop, so check back around 1030 EST, and ill have a diagram for you.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
https://www.wiringinstructions.com/v2/wiresprint.asp?recnum=10124&printsubmit=PRINT
wiring diagram is actually same as the 2010, i used this diagram and ran into no problems.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Thank you. One more question, did you use a bypass or a key?
And the door locks in the driver or pass kick?
Thanks so much
-------------
-Dennis
I get locks in the driver kick at the door harness. The new Corolla is 80bit and the Idatalink bypasses we use suck to install in them. I much prefer a key in the box...
-------------
Mike M2
Tech Manager
CS Dealer Services
door locks are at the kick panel.
as far as bypass, i use fortin pieces alot so the keyoverrideall worked well for me. supports 80bit
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert