intellistart indicator lights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125918
Printed Date: May 16, 2024 at 1:33 AM

Topic: intellistart indicator lights

Posted By: cory_thompson
Subject: intellistart indicator lights
Date Posted: January 29, 2011 at 5:18 PM

I am after a little help with my intellistart.

when i start the car with the remote I get the 2 flashes and then constant indicator lights on. Is there any way to stop the indicator lights staying on when remote started without having to connect the flasher lights to a relay and the blue/orange from the intellistart unit as this way it stops the flashing fully.

This is on an Avantguard 4 and IS4

Thanks.

Replies:

Posted By: howie ll
Date Posted: January 30, 2011 at 3:31 AM

No, funnily enough it's the other way round with Cat 1 products, the lights DON'T come on and I have to use the blue/orange, relay and two diodes to turn them on!

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window