viper 5701 soft trigger when arming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125926
Printed Date: October 30, 2025 at 11:59 PM
Topic: viper 5701 soft trigger when arming
Posted By: madlion90
Subject: viper 5701 soft trigger when arming
Date Posted: January 30, 2011 at 9:59 AM
Hi all. I've had a Viper 5701 remote start/alarm installed in my 2002 Ford F-350 for about 5 months now. It's been working fine until about a month ago. Now just about every time I arm the system i will get a series of chirps. 1st i get the conformation chirp (normal), then a 2nd chirp notifying me of an active door trigger (normal because of the delayed lighting), then I get a 4 chirp warning as if the the alarm was soft triggered (never did this before). When it does this it will continue to give the 4 chirps every 5 secs or so for a total of about 4 times. The status LED will blink 3 times meaning zone 3 (doors).
In order to stop it I have to de-arm then re-arm the alarm. Never does it when re-arming and doesn't happen every time. The troubleshooting section of the manual doesn't list anything about this. Does anyboby have any idea what's going on? Is there a setting in the programming that might fix this? Thanks
Replies:
Posted By: madlion90
Date Posted: January 30, 2011 at 3:20 PM
actually let me correct something... it gives 10 chirps not 4 and it does it 3 times before it stops. Anyone know what that means??
|