bitwriter 3 pin to 4 pin diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125972
Printed Date: May 02, 2024 at 4:19 AM

Topic: bitwriter 3 pin to 4 pin diagram

Posted By: xtac1080
Subject: bitwriter 3 pin to 4 pin diagram
Date Posted: February 01, 2011 at 5:33 PM

I purchased a bitwriter ages ago, and it only came with a 3-pin to 3-pin connector. Some of the newer alarm/rs units require a 4-pin connector. Does anyone have a diagram as to how it goes from 3-pin to 4-pin? Feedback is greatly appreciated!

Replies:

Posted By: t&t tech
Date Posted: February 01, 2011 at 5:43 PM

DEI sells the cord seperately.

Posted By: xtac1080
Date Posted: February 07, 2011 at 11:27 AM

I was looking for the diagram as to how it is wired (ie. goes from 4 wires to 3).

Print Page | Close Window