06 silverado viper 5900?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126028
Printed Date: April 30, 2024 at 1:20 AM

Topic: 06 silverado viper 5900?

Posted By: mtrhd329
Subject: 06 silverado viper 5900?
Date Posted: February 05, 2011 at 2:03 PM

I have a 06 Silverado w/t model in which i installed a viper 5900 remote start. The alarm functions well and the vehicle starts with the key just fine but when i try and remote start it, the vehicle cranks and fires but does not stay running. It fires for just a second and then quits. I double checked the tach wire and programmed the tach signal but this is frustrating. anyone have any ideas? does the work truck model have passlock??

Replies:

Posted By: kreg357
Date Posted: February 05, 2011 at 3:38 PM

Sure sounds like Passlock2. Check the steering column for a group of 3 thin gauge wires with the following colors coming down from the ignition switch: YELLOW (+), BLACK (-) and RED / WHITE.

-------------
Soldering is fun!

Posted By: mtrhd329
Date Posted: February 06, 2011 at 10:48 AM

So the three wires means passlock 2? So whatmodule would I use for that? And it would be passlock 2 for sure not passlock 1? How do I tell the difference?

Posted By: monty_77
Date Posted: February 06, 2011 at 12:34 PM

That vehicle would be passlock 2. do you have power locks with keyless entry?

if it does i would suggest something like GMDLBP

Posted By: kgerry
Date Posted: February 09, 2011 at 2:52 PM

all GM trucks from 98-up have PL II...... use the appropriate bypass module.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: zerepdivad
Date Posted: February 10, 2011 at 12:20 AM

or 2 relay it and call it a day.
you're lucky it hasn't locked out on ya.

-------------
A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Posted By: mtrhd329
Date Posted: February 10, 2011 at 3:36 PM

i have been driving the truck every day i just cant remote start it. cant i just bypass it like the old VATS systems and just put a resistor in line with the passlock wires?

Posted By: kreg357
Date Posted: February 10, 2011 at 4:58 PM

Here is a link to the "Relays and resistor" method. https://documents.audiovox.com/700054.pdf Or you could look for a DEI 556LW ( available @ online auction for ~ $23 ).

-------------
Soldering is fun!