Print Page | Close Window

remote programing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126069
Printed Date: May 14, 2025 at 4:36 PM


Topic: remote programing

Posted By: cougarcat
Subject: remote programing
Date Posted: February 08, 2011 at 1:55 AM

I have a valet 551r,and have recently purchased a lot of remote transmitters...the remotes I have are     474b      474p and a 474s .....Which of these can be programed to be used with the valet  551r...If they are possible please assit me with the program instuctions



Replies:

Posted By: smokeman1
Date Posted: February 08, 2011 at 6:23 AM
Try this site ...https://www.drdetailshop.com/transcross.htm

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation



Posted By: itsyuk
Date Posted: February 11, 2011 at 6:54 PM
hey cougarcat, where abouts in MO are you?

-------------
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.



Posted By: cougarcat
Date Posted: February 13, 2011 at 10:37 PM
St louis



Posted By: blanx218
Date Posted: February 14, 2011 at 8:07 PM
it would depend on the date code on the brain of the remote start. If its 7G - 9A you need a 485M, if its 9B - up you need a 471C or 473T


Print Page | Close Window