2011 ford explorer rs / keyless
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126140
Printed Date: July 06, 2025 at 5:26 AM
Topic: 2011 ford explorer rs / keyless
Posted By: KPierson
Subject: 2011 ford explorer rs / keyless
Date Posted: February 13, 2011 at 6:20 PM
I've got a buddy getting a 2011 Ford Explorer in the very near future. The car has the Securicode keyless pad on the door and he wants to integrate that in to the alarm.
Does anyone know if the keyless pad on the door has an output that is usable? Does anyone have a recommendation for an alarm that has disarm inputs?
Anyone have a wiring sheet for this vehicle?
-------------
Kevin Pierson
Replies:
Posted By: jim hunter
Date Posted: February 14, 2011 at 11:12 AM
usually those pads are only treated by the gem module as an extra transmitter so the only way to use them for arm and disarm of aftermarket alarm would be if the alarm has arm/disarm inputs like an add on alarm would have, you would use dr door lock motor to arm input, dr door unlock motor to disarm input and all door or pass door unlock motor as disarm defeat input, but only alarm/remote starts ive seen with these options are the ford systems by code
|