2010 ford flex
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126173
Printed Date: May 05, 2024 at 10:38 AM
Topic: 2010 ford flex
Posted By: 97gss
Subject: 2010 ford flex
Date Posted: February 15, 2011 at 10:55 PM
Is it possible to use a Bypasskit PKF3 on one of these? I have one that came out of another vehicle that I wanted to use.
Replies:
Posted By: 97gss
Date Posted: February 16, 2011 at 2:34 PM
Tried and it didn't appear to work. Used a pkfm instead. Question though. When doing the programming, is the vehicle supposed to actually start when you remote start it to program the module?? Mine didn't, and the security light blinked real fast when it was trying to start. Funny part is, it works fine after waiting for the 2 minutes, starting then stopping with the key, then using the remote start.
Posted By: blanx218
Date Posted: February 16, 2011 at 7:13 PM
Thats exactly how the PKFMs work. I've never had one start during programming. And the guide actually tells you to wait 2 mins. before testing.
Posted By: 97gss
Date Posted: February 17, 2011 at 8:32 AM
Yeah. I got that. I don't understand why it doesn't tell you that the vehicle isn't actually going to start though. Or that the security light will blink fast when you try to r/s it. Either way, the Flex went merrily on it's way.
|