97 crown vic police, engine cranks wont

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126256
Printed Date: May 15, 2025 at 9:52 PM

Topic: 97 crown vic police, engine cranks wont

Posted By: macaroni504
Subject: 97 crown vic police, engine cranks wont
Date Posted: February 22, 2011 at 5:33 AM

Installed a Bulldog RS1200 remote start/keyless entry on a 97 Crown Vic Police Interceptor. Everything was working fine until I remote started the vehicle and tried to turn on the radio. Pressed power button on the radio and engine instantly shut off and will not restart with key or remote. Engine cranks but it wont run. Got power at fuel pump and ignition coil.

Replies:

Posted By: macaroni504
Date Posted: February 22, 2011 at 5:40 AM

PS- Vehicle does not have PATS.

Posted By: i am an idiot
Date Posted: February 22, 2011 at 6:55 AM

Verify that you have voltage on the Ignition wire(s).

Print Page | Close Window