viper 5901 and spal power door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126296
Printed Date: May 06, 2024 at 4:48 AM
Topic: viper 5901 and spal power door locks
Posted By: chaddaddy
Subject: viper 5901 and spal power door locks
Date Posted: February 24, 2011 at 4:40 PM
Ok so I just bought a set of 2 door power door locks from www.spalusa.com. My question is how do I hook these to the viper? The GREEN is (-) LOCK (+) UNLOCK OUTPUT and the BLUE is (+) LOCK (-) UNLOCK OUTPUT for the Viper as you all know. The Spal is PURPLE to LOCK (-) and BROWN to UNLOCK (-) Any input is appreciated.
Replies:
Posted By: t&t tech
Date Posted: February 24, 2011 at 4:59 PM
 ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: t&t tech
Date Posted: February 24, 2011 at 5:00 PM
The 5901 no longer has flip flop outputs, it's straight negative.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: chaddaddy
Date Posted: February 24, 2011 at 5:03 PM
Ok so then If thats true then do I need the relays? Why can I not just splice right into the wire?
Posted By: t&t tech
Date Posted: February 24, 2011 at 5:26 PM
I just re-read your OP, then the wires you were reffering to were trigger wires, then yes you can splice right into them. ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: chaddaddy
Date Posted: February 24, 2011 at 6:04 PM
Ok so I would hook the purple lock (-) wire from the spal to the green lock (-) on the viper and the brown unlock (-) to the blue unlock (-) wire to the viper then correct?
Posted By: howie ll
Date Posted: February 25, 2011 at 4:53 AM
Or a 451 plugged into the white lock socket on the 5901. Or you should have brought the spals with their dedicated lock relay.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: chaddaddy
Date Posted: February 25, 2011 at 7:12 AM
Ok but the direct connect will work? If I have to do relays I wil but I want to stay away because I have to order them...
Posted By: howie ll
Date Posted: February 25, 2011 at 7:18 AM
NO! read my last post.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: chaddaddy
Date Posted: February 25, 2011 at 7:22 AM
Got it boss. Looks like ill have to wait for the shipping...
Posted By: chaddaddy
Date Posted: February 25, 2011 at 9:59 PM
Ok so before I order this 451, do I need anything else? I was reading another post about a resistor?
Posted By: howie ll
Date Posted: February 26, 2011 at 1:10 AM
No.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|