prostart and montana 2002
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126323
Printed Date: May 12, 2025 at 8:16 PM
Topic: prostart and montana 2002
Posted By: neon150hp
Subject: prostart and montana 2002
Date Posted: February 26, 2011 at 4:20 PM
Hi,I've just installed a prostart ct-3170 and a bypass kit from xpresskit model DLPKGM and the car start fine and the only thing problem I got is the passlock light stays on with the key in the ON position,if I press stop button on the remote,the light goes of for 5 sec. and come back.
So,what am I missing,there nothing in the user manual about this problem,thanks.
Replies:
Posted By: Twelvoltz
Date Posted: February 27, 2011 at 7:58 AM
Does it illuminate when you start the van with a key?
I do not see a way to reset the bypass in the DLPKGM install manual, have you tried going through the programming sequence again?
Where did you get your ground, make sure it is to a clean, paint and primer free section of the kick panel, not to an under dash piece of metal.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: neon150hp
Date Posted: February 27, 2011 at 4:17 PM
When I start the van,everything's fine,i'll try to do re-program the DLPKGM but i'm pretty sure it's not the problem and I will try another place for a ground.
|