2006 chevy silverado remote start problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126360
Printed Date: May 12, 2025 at 2:44 AM

Topic: 2006 chevy silverado remote start problem

Posted By: easternodi
Subject: 2006 chevy silverado remote start problem
Date Posted: February 28, 2011 at 5:21 PM

i put a astroflex remote start in an 06 six duramax using a inst-sl+ for the bypass and all it does is start for 5 sec trip the passlock light and shut off the starter throughs a tach signal code also the bypass does not trigger on with the remote start all my conections are correct is there maybe a problem with using the data tach wire from the intsl or am i having programing issues any feedback would be awsome as i need to get this resolved...

Replies:

Posted By: jpadj22
Date Posted: February 28, 2011 at 9:31 PM

What kind of bypass are you using?

-------------
No better feeling then getting a remote start to work right!

Posted By: easternodi
Date Posted: February 28, 2011 at 11:26 PM

it is a fortin int-sl+ firware version 3

Posted By: brcidd
Date Posted: March 01, 2011 at 10:26 AM

Did the bypass program properly? Did you use D2D or W2W- sound like bypass is not getting the Ground when running signal. If you went by data line, try direct wiring it......

-------------
Brcidd - Engineer That Does Remote Starter Installs on the side.

Posted By: easternodi
Date Posted: March 01, 2011 at 1:37 PM

the bypass programed you can pulse the door lock wires on it and they work i think i screwed up the programing on the astrostart

Print Page | Close Window