Print Page | Close Window

2008 camry hrbrid wont stay running

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126399
Printed Date: May 15, 2025 at 3:06 AM


Topic: 2008 camry hrbrid wont stay running

Posted By: md18
Subject: 2008 camry hrbrid wont stay running
Date Posted: March 02, 2011 at 4:46 PM

I just installed a Python responder one and xpresskit DB-all into a 08 Camry hybrid and it starts but it only runs for about 15 seconds and then it shuts off. The only thing i didnt do was cut the autolight wire and put the relay in, so now after the remote start shuts off it leaves the light son for a few minutes so I'm going to hook that up next. Would that be related to the remote start not staying running? Thanks for any help




Replies:

Posted By: Twelvoltz
Date Posted: March 02, 2011 at 6:07 PM
15 seconds? Sounds like the RS does not know the car is running. What does the shutdown diagnostics tell you?

-------------
Installer, IT support, and FFL. I need less hobbies.



Posted By: md18
Date Posted: March 03, 2011 at 8:41 AM

Thats a good point, i havent checked that yet, I wired it with D2D so i thought everything would be all set. The xpresskit said that it just puts out a constant 1000 rpm signal on the hybrid vehicles so do i actually have to program the remote start system to look at that for a tach signal or is it automatic once it sees that its connected D2D?

Ill be getting the car back today so I'm just trying to have a few thing to look at once i get it

Thanks




Posted By: buddholly
Date Posted: March 03, 2011 at 2:50 PM
In VirtualTach mode the car learns the tach signal after the parking lights have came on and then you need to shut it down with the remote for it to remember the signal. If you are starting it and did not let the parking lights turn on you will need to relearn virtualtach.


Print Page | Close Window