Horn Honk Help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12649
Printed Date: September 20, 2025 at 11:12 PM

Topic: Horn Honk Help

Posted By: krazypolishboy
Subject: Horn Honk Help
Date Posted: April 23, 2003 at 11:20 PM

i have a 93 jeep grand cherokee. i have the clifford matrix rs3 alarm/remote start installed. im trying to hook up my alarm so that it uses the horn honk feature instead of the siren. the brown wire (siren output) has a + charge, while the horn wire underneath the stearing collum has a - charge. i ran the brown wire to the horn wire, but it doesnt sound the horn at all. how can i get this to work? thanks a lot

Replies:

Posted By: draasch
Date Posted: April 24, 2003 at 12:33 PM

make sure you have a good connection.

try using a relay on the inside of the car.....

brown wire of the alarm to pin 85
pin 30 to the horn wire
86 and 87 ground.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window