fortin can sl2 module for 2008 silverado
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126495
Printed Date: May 14, 2024 at 7:56 PM
Topic: fortin can sl2 module for 2008 silverado
Posted By: sparkyssb
Subject: fortin can sl2 module for 2008 silverado
Date Posted: March 08, 2011 at 4:10 PM
Hello all,
After researching I believe that I can use the Fortin CAN-SL2 unit to handle my transponder bypass and door locks on my 08 Silverado (New Body Style).
Does anyone have expierience with the CAN-SL2 and will it require any additional parts (resitors, relays) to get the bypass to work?
Thanks!
Replies:
Posted By: Twelvoltz
Date Posted: March 08, 2011 at 4:31 PM
According to the manual, you should not need anything other than the CAN-SL2. Do you have it already? Fortin is listing it as discontinued. There are other options out there,
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: sparkyssb
Date Posted: March 08, 2011 at 4:42 PM
I don't have it but was looking at buying it on eBay. I really don't want to buy an expensive idatalink module. If you have other suggestions, please let me know.
Thanks!
Posted By: Twelvoltz
Date Posted: March 08, 2011 at 6:58 PM
Be very careful when buying on eBay. There are quite a few sellers on there that are not authorized to sell what they are, so make sure whoever you buy anything from will stand behind it if you buy from them. DLPK from DEI will do it too..and about the same price as the CAN-SL2 on ebay. What are you installing? If you are just doing an add on remote starter, the Fortin PATS-GM2 has worked well for me in those trucks. If you are doing a full security system, the combo module is the better way to go.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: sparkyssb
Date Posted: March 09, 2011 at 2:24 PM
Thanks again. I am installing a remote start and security system (Code Alarm 6551) so I'll need a combo unit bypass. It appears that the Fortin CAN-SL2 is the same as the DEI DLPK. (Instructions/hookups are identical)
It appears that both units will handle the bypass without the resistors or relay so that is great. That was my main concern. Thanks for your advice.
Posted By: jim hunter
Date Posted: March 20, 2011 at 4:09 PM
you wll have negATive door lock wires at the bcm and at the left side of the dash under removable cover,driver door triger will be there also, pass door trigger will be on pass side of dash and at bcm also and all you need for bypass is a blank circle plus key and a universal box to place it in, truck is very simple
|