where to place the viper in a 98 civic
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126513
Printed Date: April 30, 2024 at 2:41 AM
Topic: where to place the viper in a 98 civic
Posted By: bryanmc1988
Subject: where to place the viper in a 98 civic
Date Posted: March 09, 2011 at 4:52 PM
where is the best place to put the viper brain for the shock sensor cause i have it mounted to the floor and the shock sensor didnt work... then i removed it and zip tie it down to the ignition harness and still the shock sensor aint working when i kick the tires or even shake the car so hard that it seems as if the car was rocking and hitting the ground
Replies:
Posted By: ExtremeProAudio
Date Posted: March 09, 2011 at 6:59 PM
Did you adjust the sensitivity on the shock sensor? Depending on the model you are installing, it may come from the factory set to 'off' or very low sensitivity.
I usually throw my alarms behind the radio on those cars. The built in shock sensors also generally work better tied to a wiring harness.
Posted By: bryanmc1988
Date Posted: March 09, 2011 at 8:16 PM
i have a viper 5902 and when i go in the adjustment sensor... it has lvls 1-10 or so... is 1 Very sensitive? or is it the other way around?
Posted By: ExtremeProAudio
Date Posted: March 09, 2011 at 8:22 PM
I believe 10 is the most sensitive. You should be able to test the sensitivity as you are adjusting it from the remote. Start from the highest and work your way down.
Posted By: blanx218
Date Posted: March 09, 2011 at 9:16 PM
10 is most sensitive
Posted By: bryanmc1988
Date Posted: March 09, 2011 at 9:31 PM
i will give it a try tmr and see what happens
|