valet 552 remote lost communication
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126533
Printed Date: May 03, 2024 at 1:21 PM
Topic: valet 552 remote lost communication
Posted By: imstkk3
Subject: valet 552 remote lost communication
Date Posted: March 11, 2011 at 2:38 PM
i have a valet552 car starter with python ezsdei497 remote that will no longer communicate to the car starter when buttons ar pushed together or separate(2 button remote with red led). this has happened before an the installer reprogrammed it to the car starter in a few min.
i have the installation manual for the valet552t and have tied to program it using the learn #7 and #3 for the transmitter(ign on,press/release valet button, then choose(7), then hold valet button and push a button on the remote. But still nothing. can someone tell me what exactly to do to get this thing working again. it is in a 98 dodge ram 1500 318 and all it does is start the vehicle when you push both button simultaneously
Replies:
Posted By: gabedemelo
Date Posted: March 13, 2011 at 10:27 AM
i think with that one you program channel 1 (lock/unlock ), then 2 ( which does nothing ), then channel 3( both buttons together, which does start)
-------------
GreenGables
|