Print Page | Close Window

dei 555i programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126566
Printed Date: May 13, 2024 at 12:12 AM


Topic: dei 555i programming

Posted By: dman007
Subject: dei 555i programming
Date Posted: March 14, 2011 at 8:18 AM

How do I program a DEI 555I. I used to know how but forgot, since I haven't used this product in years. Its going into a 2001 Civic.
Thanks

-------------
DTS Performance
St Petersburg, FL



Replies:

Posted By: blanx218
Date Posted: March 14, 2011 at 11:29 AM

There are 2 different programming methods depending on when the 555I was made.

1. Insert key into ign w/out turning it on. Remote start the vehicle. LED turns off indicating programming is complete. remove key and test R/S.

2. Insert key w/out turning it on. Remote start the vehicle. LED starts to flash. Turn the key to the ON position and deactivate remote start using the transmitter. Within 15 seconds, remove the key. LED will blink for 3 seconds to confirm storage of key code. Remote start again. LED should come on for 1 second. If the vehicle starts successfully it is programmed.


Print Page | Close Window