I bought a Python 991 On ebay. I am having a problem finding the wiring diagram for my model. I know directed doesn't supply this and that you have to be an authorized dealer. I have searched here and found some stuff but everything here seems to be an older model. My system has the 18 pin connector. I have the diagrams and am set on the rest of the connectors but this I cannot find any info on. If anybody has the quick install document for this alarm it would be great if you could email or PM. I have found another message board that had the sheet that Im looking for but I wasnt able to read the text off the image on the site.
Any help would be great
Thanks
Aaron
Im set I think on the car wiring but the site recommended that I include my car info.
2010 Ford Fusion SE.
Also I was thinking about the Fortin EVO-ALL for the bypass does anybody know how that performs. More specifically about the door locks their website shows that the module will actuate my door locks. Which would mean less wiring for me.
Thanks again
Aaron
This post lists the 18 Pin wires, in order I think. Unfortunately it does not list the pin numbers or colors: https://www.the12volt.com/installbay/forum_posts.asp~TID~125250~PN~1~TPN~1
There were other posts that did, so try a search. Basically they just consolidated the wiring.
-------------
Soldering is fun!
Don't know if this will help you or not. It is listed in the downloads section.
https://www.the12volt.com/installbay/downloads.asp?srch=all&term=5901+lc
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation