prostart ct 3200 no crank?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126646
Printed Date: May 12, 2025 at 3:14 PM

Topic: prostart ct 3200 no crank?

Posted By: anotherwc
Subject: prostart ct 3200 no crank?
Date Posted: March 21, 2011 at 6:23 AM

door locks are fine with button I

button II is start but all i get is 5 flashes...

i've installed everything cept the tach wire..

is it nesseary to wire that??

i've read that the Ct3400 have to do tach reprogram...do i have to too???

mine is ct-3200 Auto only..

thanks

Replies:

Posted By: aurora24
Date Posted: March 21, 2011 at 9:30 AM

Read the sticky... Include make, model and year. You will require tack learn for it to function.

Posted By: anotherwc
Date Posted: March 21, 2011 at 12:59 PM

wops..

2007 Honda fit GD ( made in China tho..not sure if the wiring is the same as usdm ones....probably..)

Posted By: kohara73
Date Posted: March 21, 2011 at 5:58 PM

Yes you have to program tach. Read your user guide, it tells you 5 flashes is "no tach programmed".

-------------
Keith

Posted By: anotherwc
Date Posted: March 22, 2011 at 11:43 AM

thanks

i'll try it later...

Posted By: anotherwc
Date Posted: March 23, 2011 at 5:55 AM

w00t

everything went well after doing the tach wire..lol

silly me..

now another question,

i want to reset my ecu...by removing the neg battery cable..after some modding to my car....hearder, exhaust...

that would reset the Ct3200 too righT??

i have to reprogram it all over again??!?!?!?

Posted By: anotherwc
Date Posted: March 23, 2011 at 7:08 AM

oh btw..

my oem remote "lock and unlock" dont work..

but then SOMEtIMES it works..but only one button works at a time... the lock works but the unlock doesnt...vice vrsa

i dont get it..

Print Page | Close Window