Shock sensor mounting

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12668
Printed Date: June 10, 2024 at 5:53 PM

Topic: Shock sensor mounting

Posted By: turd
Subject: Shock sensor mounting
Date Posted: April 24, 2003 at 12:46 PM

Do you mount your shock sensor with screws directly to firewall?

Or do you simply zip tie it to some bracket?

And why?

Replies:

Posted By: enforcerviper
Date Posted: April 24, 2003 at 1:17 PM

When I got my alarm installed for me the installer screwed it to the steering column. This didn't work for me at all. It only sensed the front drivers fender, nothing else. I relocated it using zipties to an air vent. Now it works perfectly all over the car.

The only problem I face now is when people with loud music and a LOT of bass come by, the vibration triggers the warn away of the shock sensor.

Print Page | Close Window