alpine alarm/door actuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12678
Printed Date: May 19, 2025 at 4:17 PM

Topic: alpine alarm/door actuators

Posted By: gillAteen
Subject: alpine alarm/door actuators
Date Posted: April 24, 2003 at 2:43 PM

This is my first install,and I can figure most stuff out,i'm adding power door actuators and do I have to add(have)relays?Or are they already built into the alarm module?I made up some like this:[img]https://www.the12volt.com/images/actuatorrevpol.gif[/img]

and bench tested it,and it didn't work at all to pop the actuators.without the relays in,the actuators will unlock,but not lock with the remote.

please remember i am a newbie,and may be overlooking anything obvious!lol!

the alarm is an alpine sec100s,the car is a '99cavalier.

Replies:

Posted By: Velocity Motors
Date Posted: April 24, 2003 at 6:07 PM

According to my notes on this alarm you have to add relays to lock/unlock the doors.Try this diagram for the actuators: Adding Door Lock Actuators Diagram and post your results.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: gillAteen
Date Posted: April 24, 2003 at 9:26 PM

thanks alot!i'll give it a shot tomorrow!

Rob