oem remote not working?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126782
Printed Date: May 14, 2025 at 5:24 AM

Topic: oem remote not working?

Posted By: anotherwc
Subject: oem remote not working?
Date Posted: March 30, 2011 at 4:59 AM

07 honda fit GD. auto.

after installing prostart ct3200..

my oem remote dont respond very well...matter a fact, very poorly..

i have to press it like 10 times inorder to lock or unlock my car....

is the prostart remote conflicting with the oem remote????!!!

Replies:

Posted By: Thack79
Date Posted: March 30, 2011 at 7:41 AM

is this during remote start or at all???

Posted By: anotherwc
Date Posted: March 31, 2011 at 6:11 AM

during remote start oem dont work.

i think thats normal.

but when the car is sitting still and off....

oem dont work that well specially from far...

Posted By: Twelvoltz
Date Posted: March 31, 2011 at 7:05 PM

What bypass did you use?

Try moving the brain of the RS. I had a Nissan Altima that had a similar problem. Apparently the RS was inducing noise that the OEM system did not like. Factory remotes only worked from about 10' away, I moved the aftermarket brain away from the vehicle module it was next to and it returned to normal.

-------------
Installer, IT support, and FFL. I need less hobbies.

Print Page | Close Window