Print Page | Close Window

VDC anc VAC

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12681
Printed Date: May 19, 2025 at 8:51 AM


Topic: VDC anc VAC

Posted By: amcmac
Subject: VDC anc VAC
Date Posted: April 24, 2003 at 3:51 PM

I want to install a momentary push-button switch in my car.  The only one the matches very well is one from Radioshack.  However it has a rating of 3A @125VAC or 1.5A @250VAC.  My first question is, can I use a VAC switch in a 12VDC system?  If so is there any formula that tells me how many amp can I pull through this switch before I need to use a relay?

Thanks for the help!




Replies:

Posted By: draasch
Date Posted: April 24, 2003 at 8:37 PM
what are you looking to do with the switch?????

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window