avital status light
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126815
Printed Date: May 10, 2025 at 2:18 AM
Topic: avital status light
Posted By: woody7885
Subject: avital status light
Date Posted: April 02, 2011 at 7:52 AM
I had a miniture car painted the same color as my car. The big car has green underbody, and the little car has a green led in the backseat. I was attempting to attatch the small led to the status light of my alarm (the light the blinks while the car alarm is on) But i am unsure what output the status light has. I attempted to connect it directly to tle wire and ground it other places, but it didnt work, so i plugged it to the park lamps. Do i need a relay for connnections between a staus light and a additional LED? I have a avistart alarm, fully connected.
Replies:
Posted By: howie ll
Date Posted: April 02, 2011 at 8:34 AM
Wire in parallel
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: April 02, 2011 at 8:35 AM
Oh and it's a 2.5 volt LED, don't get a 12volt.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|