viper 5902 in dodge challenger?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126876
Printed Date: May 08, 2025 at 2:37 PM
Topic: viper 5902 in dodge challenger?
Posted By: brentt03
Subject: viper 5902 in dodge challenger?
Date Posted: April 07, 2011 at 2:08 PM
Hey guys! Newb here!
Looking to install the Viper 5902 in my 2010 Dodge Challenger 6spd
I ordered
Viper 5902
Xpresskit CHALL
Disturbance Sensor 508D
Luminescent Indicator 620V
I am looking to install this myself this weekend, from what I understand with the CHALL it is pretty much plug-n-play aside from soldering a few wires.
Any help or thoughts here?
Thanks guys!
Replies:
Posted By: buddholly
Date Posted: April 08, 2011 at 3:05 PM
Never had good luck with the CHALL especially if the vehicle has a factory alarm. The FLCAN or similar module would have been a better choice.
Posted By: brentt03
Date Posted: April 08, 2011 at 11:50 PM
Yeah I just had the alarm installed today by a dealer and it took forever. I think the CHALL was some of the source of all the issues.
The dealer also installed the 508D, and i dont think it is set sensitive enough, will have to tweak that tomorrow.
Posted By: brentt03
Date Posted: April 08, 2011 at 11:54 PM
Also I tried to adjust the sensor settings but it gave an error "NO FUNCTION ASSIGNED"????
|