autopage rs 900 lcd remote problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126937
Printed Date: May 02, 2024 at 9:10 AM
Topic: autopage rs 900 lcd remote problem
Posted By: kjdavis
Subject: autopage rs 900 lcd remote problem
Date Posted: April 12, 2011 at 4:45 PM
I have an Autopage RS900LCD installed in my 02 F350, and I just recently swapped out both batteries in the truck. I'm not sure if it was a coincidence or not, but the remote (XT-90LCD) stopped working after that. I tried to go through the reprogramming process, and get the proper chirps from the alarm showing that I am entering, and exiting programming mode, yet nothing happens when I press a button on the remote to program.
Any suggestions? Is the remote dead?
Replies:
Posted By: syl20rochon
Date Posted: May 14, 2011 at 7:52 PM
Not too familiar with the particular brand of r/s but did you change the battery/batteries or charged the remote? Also, did you make sure that you're not in valet mode.
-------------
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
|