can’t program cm5000
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126975
Printed Date: July 09, 2025 at 7:29 PM
Topic: can’t program cm5000
Posted By: quakefire
Subject: can’t program cm5000
Date Posted: April 16, 2011 at 1:32 AM
Howdy,
I have a Compustar CM5000 with a 2W9000 two way remote. The installers manual states to enable the turbo timer you go into programming mode you press buttons one and two for 2.5 sec then one and four for the same amount of time. I can't get into the first one, I get fail on the remote and three flashes on the park lights. Can't get it to work.
Help?
Replies:
Posted By: quakefire
Date Posted: April 16, 2011 at 11:57 AM
Sorry it's in a 1994 Toyota Celica GT-Four. All other installed functions are working fine (start, alarm, reservation mode)
Posted By: Velocity Motors
Date Posted: April 17, 2011 at 10:42 AM
You must turn on the turbo timer feature from the option menu first before you can turn it on from the remote control. Also, you have to have the park brake wire attached from the CN2 harness
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: quakefire
Date Posted: April 18, 2011 at 12:35 PM
Park brake is wired, and functioning (car is a standard trans) Install manual states to enable the option in the menu from the 2way remote by first pressing buttons 1+2 for 2.5 sec then 1+4 for 2.5 secs to get into option menu two. After enabling there you ahould be able to aet the turbo timer from the remote. I get fail on the remote when I try pressing one and two for the first part of the sequence.
|