viper 3303 and 530t
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126994
Printed Date: July 18, 2025 at 4:08 PM
Topic: viper 3303 and 530t
Posted By: superwhite06
Subject: viper 3303 and 530t
Date Posted: April 17, 2011 at 7:38 PM
I was in the process of installing my Viper 3303 in my 2006 Scion tC... I had no problems whatsoever with installing the alarm. My problem is with the 530T, my AUX 1 channel is pulsed and only rolls my window down an inch or so at a time, I try and press and hold the AUX button after pushing the "f" button and nothing happens, I have to keep pushing the "f" then AUX button for it to come down an inch at a time.
Also it doesn't roll the window up when armed. If I change the 5th dip switch to Positive the module continues to click.
I know I wired it up correctly I think, lol. What is going wrong with it? Do I need a Bitwriter to program AUX 1?
Thanks
Replies:
Posted By: t&t tech
Date Posted: April 17, 2011 at 7:53 PM
Have you tried holding down the aux? I think default on that unit is validity.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: superwhite06
Date Posted: April 17, 2011 at 7:56 PM
I have tried but nothing it says "Pulsed" after I push the "f" button then the AUX button
Posted By: superwhite06
Date Posted: April 18, 2011 at 4:25 PM
Anyone know anything about this alarm and the 530T?
|